Price: ₹2,999 - ₹1,299.00
(as of Jan 31, 2025 00:04:49 UTC – Details)
Hogart electric taps provide water and instant heating. Simply connect the water heater to the mains and water, and the built-in element heats it to 55 degrees temperature within 5 seconds.
Save up to 50% on purchase costs!
Save almost 50% of purchase costs when buying an electric tap with the function of continuous heating 2 in 1, you do not need to buy tap and electric water heater separately.
Hot water 24/7.
Conventional water heaters have a limited amount of finished water. After the hot water tank runs out of hot water, you need to wait some time for the water to heat up again.
With our Hogart electric instantaneous water heater with the function of instant water heating, you don’t need to wait. The tap always provides you with unlimited hot water.
Save up to 30 euros annually!
Conventional electric water heaters consume up to 1 kW of electricity per day, even if you do not use warm water. After installing our sink tap with continuous heating, you save up to 30 Euro electricity costs per year. Our products only consume electricity if you use really hot water.
Safety counts:
With these 4 safety instructions, our products are safe and reliable to use.
- Overheating protection without water.
Protection against overpressure in the mixer
Hydroelectric wall between the water heating zone and the electrical part.
Product with high splash protection IP4X
Plug type: EU plug
Hogart Electric tap provides heat and water. Connect the sink tap to the power and water network and it heats it up within 5 seconds.
The water temperature varies between 25 and 50 degrees, depending on the pressure of the jet, the stronger the jet, the lower the temperature. In the cold winter time, the maximum temperature of hot water heating can be lower than usual and cannot reach more than 30-40 degrees. If you urgently need a large amount of hot water, we recommend using a conventional water heater.
The water heater comes in a complete DIY package. The package includes a complete kit for easy and quick installation. Extended thread for connecting to worktops up to 30mm thick. To mount the cable under the worktop, a minimum 36 mm wide opening for the electrical plug is required.
Features: 1 x radiator, 1 x solid classic spout, 1 x hose for connecting to the water supply 40 cm (1/2 inch F to 1/2 inch), 1 x protective gloves, 1 x manual (English language not guaranteed).
Our products come in a complete set and can be connected directly to the water supply system. The installation of the product is quick and easy, you can do it yourself, which saves you time and costs for hiring qualified professionals.